20 Door Lock Replacement Websites Taking The Internet By Storm
Door Lock Replacement - What You Need to Know
It's a good idea for you to change your locks when they begin to exhibit signs that they're worn out. These indicators include having difficulty turning the lock, or having a key that does not fit.
It is easy to install new door hardware. All you have to do is follow these steps.
Deadbolt
The deadbolt on your door is the primary defense against forced entry. It is more durable and secure than the latch that opens the lock. Therefore, you'll want to ensure that the new deadbolt you purchase meets your requirements. If you can, opt for deadbolts that are made of case hardened steel and no exposed screw heads on the outside to stop drilling that isn't authorized. The interior side of the deadbolt should also be mortised into your door frame to increase security.
When you install the deadbolt, check that your new deadbolt's bolt slides smoothly into the strike plate once you lock and close the door. If not, make a mortise bolt into the strike plate with the help of a wood chisel before you install the deadbolt. Make sure that the doorknob's latch aligns with the hole in the deadbolt when you close and lock the door, too.
Before installing your new deadbolt, make sure that it is the same size of the old one. The majority of door locks include an example of how far the bolt should be placed above the doorknob. However, it's always best to consult an expert in hardware if you are unsure what backset size you require for your doors. They will be able to direct you towards models that work with your door and the existing deadbolt opening.
After ensuring that the new bolt assembly is of the correct length, insert it into the hole of the door. Screw the faceplate of the latch into the hole if the new deadbolt has one. It's an excellent idea for you to attach the latch faceplate with the recommended screws to the frame.
Some sets of locks come with an attractive or "dummy" bolt, which lets you install the keyed-deadbolt while still having an effective latch. If you're able to choose that the dummy bolt is installed, it must be installed using the same screws used to mount the faceplate for the latch. This will ensure the highest security.
Some deadbolts come with only a single cylinder accessible from the inside using a thumb-turn, while others have a double cylinder that allows keyed and unkeyed access. It is recommended to select the lock that's commercial grade for the highest security. They are tested to withstand up to 250,000 cycles of opening and closing before they are sold to homeowners.
Latch
The latch is the part that retracts the bolt when you shut or open the door. It's typically held in place by screws located on the sides of the lock, however it could also be fixed to the strike plate or to the inside of the jamb. When replacing a door latch it is essential to ensure that you purchase the right one that is compatible with your existing hardware. You can check by holding the latch up to the hardware you have already, or you can look on the label of a replacement. Dunn Lumber offers a wide range of brands. However, it is best to select a brand that matches your current hardware. This will ensure that the latch you buy will fit properly.
Certain doors have the appearance of a hasp, instead of a latch. A hasp is a piece of strap with a slot it that allows it to be placed over the staple. The staple is then fixed to the frame of the door or door using the help of a nail. When the door is shut, the strap pulls the staple down and secures it into the frame. Commercial buildings utilize a hasp since it is less expensive than locks.
Locks are susceptible to wear and tear over time as does any other mechanism with moving parts. Sometimes, the internal mechanism may start to "stick" and be difficult to turn, requiring to replace the entire lockset. Sometimes, the exterior handle or doorknob will break, and it is necessary to replace it too.
If your lock is sticking, you can try using some graphite inside the keyhole. You can either spray some on the key or sprinkle it on the inside of the lock, then operate the lock a few times to get the graphite into the mechanism. You can remove the knob using a screwdriver, which will expose all the parts and allow you to know what's going on inside.
Once you've removed all the knobs, find the cylinder with two or three setscrews along the edge of the cylinder and tighten them by turning clockwise. upvc door locks replacement is also recommended to remove the faceplate and replace it. Surface-mounted rim locks include an additional set of cylinder setscrews on the rear of the case. These must be removed, as well as the cover plate.
Strike Plate
The strike plate is a way to strengthen and upgrade to a locking system. It is attached to the holes for deadbolts or master key systems bolts. It helps keep intruders out by ensuring that the lock's latch is caught in the strike plate when the bolt or latch is engaged. A high-quality strikeplate can increase the durability of locks and increase security.
A standard strike plate appears like a flat, metal plate with holes or sets of holes cut into it. It is anchored, typically by screws, to the doorway's frame to provide the latch with an area to sink into when it closes. It is important that the strike plate be precisely aligned with the lockset in order to ensure maximum security against burglaries.
If the strike plate on the door is damaged, you must replace it as soon as possible. This will ensure that the door can close and latch correctly. The first step to replace the strike plate is to ensure that it is aligned properly with the bolt hole inside the doorjamb. One way to check this is to put tape over the bolt hole and then test the latch by opening and closing the door. If the latch doesn't work then take off the tape. Then, chisel the hole to ensure that the strike plate is flush with the doorjamb.
After the area has been removed it is crucial to use a more powerful screw to secure the strike plate. These should be at least three inches long to ensure that they are securely secured to a stud in the trim board. If you do not use the longer screws, the wood in the doorjamb could break during a kick-in attack by a burglar, and make the door vulnerable.
A professional locksmith can quickly replace the strike plate that has been damaged or worn out. They can also install new strike plates on doors that never had them before. They can also upgrade existing strikeplates to improve the security of the building and its appearance. This can aid property owners in attracting tenants who want a secure living environment and more peace of mind.
Keys
The key cylinder is a part of your lock that accepts a specific key to shift pins into place so that the inner handle can be turned. The key cylinder is the primary element of your door lock, because it fulfills the function for which locks were created to safeguard you, your family, and your possessions. Rekeying locks is a cost-effective option than replacing them.
The process of replacing a lock is more complex than simply swapping out the current deadbolt or handle lock. The old hardware, cylinder, and handle (if you have the knob and lock combo) must be removed from the door before a new lock can be installed. There are a variety of DIY-friendly kits that can be used to replace the door lock. However, it's recommended to call an expert locksmith to ensure that the job is done properly.
Before installing an entirely new lock and cylinder it is crucial to have the correct key for your home. A key that is duplicate will not work properly and could even cause the lock to fail completely, rendering it impossible to open. A professional can stop this from happening by ensuring that you have a a working, real key for your home.
Next, you will need to remove the faceplate and latch plate. You will need an screwdriver to take out the screws that secure them. If the new plates are going to be identical to the original ones, you may wish to keep them in place to save time. If you have to replace them, don't overtighten screws as this can reduce their grip.
After removing the plates, you will need measure for the new locks. It is important to know your door's dimensions prior to visiting the hardware store. Although many locksets can be used today to fit a standard door thickness, it's best to have them in advance. Doorknob locksets are often different sizes from deadbolt locks, commercial models might have a larger bolt or latch.